Until I figure out the cooling system I ran up north over the weekend and grabbed the 2 horse Honda 4 Stroke. I wanted to use this motor on my Widgeon for the south zone opener. How much water should this motor pump? I realize this is not a 9.9, 15 or 25 it is only a 4 horse Single Cylinder 2 stroke.
We are Australian owned and operated and supply.
I am going to drop the lower unit again and check to see if the water pickup pipe is seated correctly in the water pump housing. Shop for Suzuki outboard impellers & cooling parts for all make and models via Outboard Spares now. However, there is a wet mist of exhaust coming from two small exhaust holes on the shaft. The bigger problem is that I am expecting a strong stream of water coming coolant hose. The motor runs better now that the carb cleaner has been run through and sat for awhile. I got everything back together and started it up. (Kind of went with replacing the stud bolt) I had no choice but to disassemble the pump housing to replace the stud bolt and changed the gaskets while I was at it. While doing so, one of the stud bolts that holds the pump housing to the lower unit snapped. I located a new impeller and put things back together. The impeller definately was old and required replacement. I popped open the lower unit and opened up the water pump housing. He was correct the water pump was not pumping hardly it any water. Thousands of parts available: Outboard, PWC, Inboard, I/O, Powerheads. The motor definately runs but, really could use a new spark plug and a good carb cleaning or Jet Replacement. PRODUCT DESCRIPTION: Suzuki Water Pump Impeller DT4-8 1984-2002 18-3097. I added fresh fuel/oil with some carb cleaner and started it up in a bucket of water. I brought it home and drained the fuel tank (internal) because the fuel smelled worse than Turpentine. After sitting so long I knew the Impeller needed replacement. However, he did mention that it was not pumping water. It has been stored in his garage for the last 8 years and was in running condition that last time he used it. My wife's uncle gave me a 1989 Suzuki 4 HP 2 stroke outboard a few months ago.
Please be sure to read and understand all terms and conditions before buying.Maybe someone can enlighten me on something I may have missed. Any part returned with cut wires is subject to a $30 service charge, defective or not. Units returned in working order are subject to a $25 bench test fee and will be returned at buyer's expense. Any defective unit returns will be exchanged with the same part number ONLY. The manufacturer warranty protects you from defects in materials or workmanship but will not cover freight damage, broken solenoids, rust/corrosion/submersion, broken mounting flanges or shafts, cut wires or dismantled units, broken nose housings, units with date codes removed, or any unit showing misuse or altering of any kind.
IMPELLER SUZUKI DT4 SERIAL NUMBERS
Make sure to check your serial numbers and know your motor's model year before ordering: Regular replacement insures proper cooling and. Aftermarket Suzuki water pump impeller DT4-8 1984-2002. Water pump impellers are the heart of the cooling system and should be replaced at regular service intervals.
0 kommentar(er)
